Timberguard

köpa Viagra gran canaria
http://www.tangotec.com/?sitere=come-funziona-optionavigator&7cf=d8 Primer is a water based penetrating primer to seal and  moisture proof the timber prior to application of the Natural Tone Polyurethane.
http://makse.com/?kremel=wayne-cook-hook-up&a2b=5c Natural Tone for exterior application is a clear/semi transparent pigmented/oxide, water based polyurethane that has been designed to protect, highlight and enhance natural timber tones and fibrous products for exterior and interior use. It produces a beautiful transparent natural finish for new timber or, rejuvenating previously stained, oiled or painted timber. source site Natural Tone is the number 1 choice for all click here exterior long life timber applications.

buy tastylia oral strips online no prescription Coating Selection – “it couldn’t be easier”
One of the main advantages of using Timberguard Finish Natural Tone, is that the one product will beautify & enhance all exterior timbers. You do not need a separate finish or stain for Pine, Hardwood, Cedar, Merbau and all the other timbers in the market. Natural tone has been designed to make your choice simple & easy.

Recommended uses

As weather and temperature conditions within Australia vary considerably and can be extremely harsh it is recommended that application of 3 coats or more for MAXIMUM protection should be done. Apply 4 coats for high traffic commercial areas and/or harsh geographical regions.

http://oasection6.org/minored/es/4419 Timberguard Finish Natural Tone is excellent for all exterior/ interior timber, e.g. Decks, cedar or hardwood clad homes, timber screens, pergolas, handrails, timber louvres, fences, furniture, garage doors, windows, doors etc. Other applications include composite timber (refer to manufacturer / distributor) and cement fibre boards for cladding.

binäre optionen auf was setzen la borsa facile opzioni binarie Natural Clear click Interior is a single part Water Based Polyurethane. Best used when the prerequisite is to preserve the exact tone/colour and grain of timber. Natural Clear Interior is still the right choice, as it will outperform all other leading market brands. Note, both of these coatings come in a Matt or Gloss finish. the Matt finish is a pure matt finish, unlike other brands that produce more of a satin appearance.

Specify enter site Natural Clear Interior where the prerequisite is to preserve the exact tone/colour and grain of timber. Natural Clear Interior is still the right choice, as it will outperform all other leading market brands. Note, both of these coatings come in a Matt or Gloss finish. the Matt finish is a pure matt finish, unlike other brands that produce more of a satin finish. Applications would include Cedar doors/windows , timber louvres/shutters, internal feature wall panels, doors, frames & furniture such as pine & teak. Other uses include specific composite timber products (see composite timber section) and in some decking/exterior timber applications. Note: unlike Timberguard Natural Tone, natural clear in specific exterior applications will require frequency of re coats – see long life tips decking/exterior timber.

Timberguard Slip resistant coating

Most natural timbers and composite timber surfaces do not meet the non slip standard as per AS/NZS 4586 – 2004 for wet slip resistance. This is especially important for all public access areas, decks, pool surrounds, ramps and stairs which require a ‘W’ rating or higher as specified in the standard. Refer to the ATTAR classification criteria
Fine Grit – W rating for horizontal decking, walkways, wet and low use surfaces. Medium Grit– V rating for ramps, steps, wet and high use public access areas.
Slip resistant granuals for Timberguard

Download Wet Test Specificationclick here to download pdf for wet- slip resistant test on Innowood Ultra v Stepon Grit is a slip resistant additive that has been formulated for use in Timberguard and other water based and solvent based surface coatings. Stepon Grit will provide a high performance, long lasting textured finish which reduces the slip resistance to horizontal surfaces as per AS/NZS 4586-2004 slip resistance classification for pedestrian surface materials.

Ultra V Timberguard Timber Coatings are available in:

  • Primer /sealer – 4 Litre – 10 Litre
  • Natural Tone Exterior - Matt finish and Gloss finish  – 4 Litre – 10 Litre – 20 Litre
  • Natural Clear Interior/exterior – Gloss – 4 Litre – 10 Litre – 20 Litre
  • Natural Clear Interior/exterior – Matt – 4 Litre – 10 Litre – 20 Litre