Decking Long life Tips

As weather and temperature conditions within Australia vary considerably and can be extremely harsh it is recommended that application of visit here 3 coats or more for MAXIMUM protection should be done. Apply site web 4 coats for high traffic commercial areas and/or harsh geographical regions such as coastal or tropical areas.

http://onodenje.com/?strydor=bin%C3%A4re-option-demo-konto Coating Selection – “it couldn’t be easier”

One of the main advantages of using Timberguard Natural Tone, is that the one product will beautify & enhance all exterior timbers. You do not need a separate finish or stain for Pine, Hardwood, Cedar, Merbau and all the other timbers in the market. Natural tone has been designed to make your choice simple & easy. binära optioner sverige

Köpa Cialis apoteket Timberguard Clear Primer is a very quick and easy product to apply that will penetrate and moisture proof the timber prior to coating with the Natural Tone or Natural Clear. The Primer is to be applied to all timber projects before application of the Finish Coat. The Primer will be dry and ready to coat over in 30 minutes.

go Natural Tone trading opzioni binarie cos\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'è for exterior application is a clear/semi transparent pigmented/oxide, water based polyurethane that has been designed to protect, highlight and enhance natural timber tones and fibrous products for see this website exterior and interior use. It produces a beautiful transparent natural finish for new timber or, rejuvenating previously stained, oiled or painted timber.

http://www.kenyadialogue.com/?selena=corvi-neri-opzioni-binarie&fb9=66 Natural Tone is the number 1 choice for all http://www.huskipics.com.au/?kamatoznik=apa-itu-binary-option-robot&ba2=ac exterior long life timber applications.

quanto e vero che siguadagna con trading binari Natural Tone and Natural Clear is available as a  Gloss and Matt finish.

Water based colour tinting can be added to the Clear finish to create a full pigmented colour for specific orders (a minimum quantity is required).

It is recommended that when http://revedecabane.com/?ower=operazione-binarie-piattaforme&120=d3 long life and minimal maintenance is the prerequisite, that http://autoinforma.it/index.php?option=com_jcomments Natural Tone is specified. Natural Tone (because of added pigments/oxides) will outperform Natural Clear in life cycle.

Specify click Natural Clear Interior, where the prerequisite is to preserve the exact tone/colour and grain of timber. Natural Clear Interior is still the right choice, as it will outperform all other leading market brands. Note, both of these coatings come in a Matt or Gloss finish. the Matt finish is a pure matt finish, unlike other brands that produce more of a satin finish. Applications include the protection of all interior timber such as, Cedar windows/doors, furniture such as pine & teak, door frames, timber features & wall paneling. See web site for exterior applications.

To further enrich & enhance your timber, you can also apply click here to read Timberguard resource Natural Tone for all internal timber applications, especially in areas where there is maximum UV exposure (such as window sills and timber shutters or blinds).

Note: unlike Timberguard Natural Tone, natural clear in specific exterior applications will require frequency of re coats. Frequency will be dependent on visual inspection and level of exposure.

Slip resistance for Decks if a “wet-slip resistant” protection is required for wet or public areas, a special Stepon Grit additive is available for purchase from your retailer.

click here to download pdf for wet-slip resistance test on Innowood

Long Life Tips for Timberguard Primer & Natural Tone Finish.

Semi-arid areas – Apply 1 coat of the Timberguard Primer and then apply a minimum of 3 coats of Timberguard Finish for maximum timber protection. Apply 4 coats of Timberguard Natural Tone Finish for extreme UV exposure or high traffic areas or with little shade cover. This is especially important for fully exposed decking facing North.

Coverage 1st coat of Timberguard Primer approx 8m² for dressed timber and 5m² for rough sawn timber, and then apply Timberguard natural Tone Finish 1st coat on dressed timber 12m²/litre, 2nd & more coats up to 14m²/litre. 8m²/litre for 1st coat and 12m²/litre per subsequent coats on rough sawn timber. Coverage varies depending on the texture and porosity of the timber.

Drying Time Touch dry in a few minutes @ 25°Celcius and recoat in approx 2 hours depending on temperature, humidity and other weather conditions. Do not apply if the temperature is below 10°C or above 35°C during application or drying period.  If rain is imminent do not apply Timberguard.

Hot, dry, arid areas – Apply 1 coat of the Timberguard Primer and then apply a minimum of 3 coats of Timberguard for maximum timber protection. Apply a minimum of 4 coats of Timberguard for extreme UV exposure or high traffic areas. This is especially important for fully exposed decking facing North with minimal shade cover.

Tropical, high humidity areas – Apply 1 coat of the Timberguard Primer and then apply a minimum of 3 coats of Timberguard for maximum timber protection. Apply 4 coats of Timberguard for extreme UV exposure or high traffic areas. This is especially important for fully exposed decking facing North with minimal shade cover. Do not apply Timberguard on days of extreme humidity, this could affect the adhesion of the coating to the substrate.

Timberguard can be applied to timber exposed to high rainfall providing there is sufficient run off and or ventilation for the water to dissipate and dry out the timber, if any timber is immersed in water for long periods do not apply any Timberguard. It would be prudent to completely encapsulate the timber with the Timberguard Primer prior to the application of the Natural Tone Finish to completely moisture proof the timber.

Decking that is fully exposed to the sun can reach very high temperatures and an alternative to consider is to apply Timberguard with a water based Universal solid pigment in a very light colour that will reduce the surface temperature of the timber or composite wood considerably. For coating of composite wood refer to the distributor / manufacturer for their recommendation.

Expect up to 3 years plus protection depending on geographic location/exposure, existing shade cover and correct timber coating application, providing protection against sun, water and dirt. Also expect a longer life cycle using Timberguard Natural Tone, as the added pigments have additional UV blockers.

Preparation Guide Lines: You must prepare/clean all timbers correctly with Ultra V Timber Prep (as per label instructions) for all new timbers, previously stained, oiled & grey timbers. Timber that has been sanded should also be cleaned prior to coating.

Application method:

Decking: Lambs wool flat applicator (180mm, 270mm, 360mm )

Mohair or Micro Fibre rollers (white)

(100mm to 270mm wide 9 – 12 nap thickness)

Vertical Timber: As above, plus brushes and spray equipment.

IMPORTANT – to ensure a high quality result, please follow surface & timber preparation tips and application instructions.

Download Ultra V Timberguard application instruction

Long Life Tips for Natural Clear Interior.

To achieve the maximum life expectancy.

Interior: To achieve maximum long life protection for internal timber applications such as furniture, door frames, architraves, trims, timber shutters & panelling – apply 2 coats for areas that are not effected by direct sunlight. 3 coats for areas that are affected by direct sunlight such as window sills, windows frames, cedar blinds & other woodwork. Not suitable for internal flooring.

Exterior: To be used in shades & undercover areas only. Natural clear protection for external timber applications such as decks (if completely undercover), rails, balustrades & other feature exterior timbers, apply 1 coat of Timberguard Primer to seal the timber and then a minimum of 3 coats must be applied. 4 coats for high traffic areas such as decks, walkways & steps. Re coat when necessary after visual inspections. Note: It is recommended that Natural Tone be used where long life & low maintenance are the prerequisites.

Preparation Guide Lines: All interior timber surfaces should be cleaned &/or sanded. For exterior, all timber must be cleaned with Ultra V Timber Prep (as per label instructions) .Timber that has been sanded should also be cleaned prior to coating.

Application method:

Brush, Lambs wool flat applicator (180mm, 270mm, 360mm ) for decking

Mohair or Micro Fibre rollers (white)

(100mm to 270mm wide 9 – 12 nap thickness) .

Disclaimer -Warning when applying a surface coating to exposed timber the water will bead and could be a risk when walked on, causing a person to slip. An alternative is to mix Stepongrit slip resistant granuals to the polyurethane and apply to the deck thereby greatly reducing the risk of slipping.

Ramps & Stairs Apply 1 coat of Timberguard Primer and then apply a minimum of 3 coats of Timberguard Natural Tone for these high wear areas mixed with Stepongrit for full wet slip resistant protection to ‘W’ rating. Apply 4 coats of Timberguard Natural Tone for high traffic commercial or public access areas. Refer to the ATTAR classification criteriaDownload Wet Test Specification

Maintenance
An annual inspection of the coated surface is recommended to ensure that no product has been affected by moisture or normal wear. It is important to maintain correct timber protection.

If the appearance of the coating is thin or patchy, a re-coat of the affected area is recommended.

If the coating has blistered, peeled or is flaking, due to incorrect application or ineffective pre treatment, sand back to bare timber & re-apply as per manufacturers instructions. The Primer will also have to be applied prior to the application of the Natural Tone Finish.